Spare parts for Vespa, Scooter, Mopeds, Motorcycles
Find spare parts for your Vespa, Scooter, etc.
Reference: DL09006109
Brand: Dell'Orto
Fuel filter for Dellorto SHA-PHBE-PHB-PHF-PHBH-PHBL-PHM carburettor catalog references: 6109 - 29
Reference: DL09011600
Brand: Dell'Orto
DELLORTO carburettor jet ref. Catalog 11600 x 02
Reference: DL09001476
Brand: Dell'Orto
Cable cover for Dellorto carburettor SHA-PHBE-PHB-PHF-PHBH-PHBL-PHBN-PHVA-PHBG-PHBD-PHM-VHSA-VHSB-VHSC-VHSH-VHSD-VHST-VHSG catalog references: 1476 - 06
Reference: DL09012530
Brand: Dell'Orto
Idle emulsifier jet for Dellorto PHBH-PHBL carburettor catalog references: 12530 x 02
Reference: DL09013086
Brand: Dell'Orto
Idle emulsifier jet B for Dellorto carburettor PHBH-PHBL-VHSA-VHSB-VHSC-VHSH catalog reference: 13086 x 02
Reference: DL09008649
Brand: Dell'Orto
Needle valve for Dellorto carburettor PHBE-PHB-PHM-PHF-PHBH-PHBL-VHSA-VHSB-VHSC-VHSH catalog references: 8649 x 33
Reference: DL09052523
Brand: Dell'Orto
Gasket set for DELLORTO PHBH ... AS-AD-BS-BD-GS-IS-LS-US-VS-PS carburettor reference catalog 52523
Banner
Pinasco 102cc SRV "Zuerino" cylinder kit Ø 55mm, stroke 43mm. Born on the basis of the famous 135cc Zuera, it uses specific manifold for Ø22-24-25 carburetors.
Security policies
(change them in the Customer insurances form)
Shipping policies
(edit them in the Customer insurances form)
Return policies
(change them in the Customer insurances form)
The Pinasco 102cc SRV "Zuerino" Ø 55mm cylinder kit is a new product dedicated to the world of Vespa 50s in 43mm stroke. Born on the basis of the famous 135cc Zuera, the 102cc SRV "Zuerino" has a transfer system very similar to that of its older brother, uses the same RD350 type reed valve and the same flow guide, mounts a single-ring piston with bi-conical pin, the new head with central spark plug with 8 studs with centering bushings which definitively eliminates the problem of drawing and consequent loss of performance with a compression ratio of 12.3: 1.
The Pinasco 102cc SRV is a copious engine created to make the most of the power at low revs, its exhaust port has been designed to work correctly with original exhausts and molded mufflers commonly called "bananas" but can also be used in more demanding preparations. .
It does not require special machining on the crankcase, it can be used with all crankshafts on the market including the originals, its installation allows you to also use the crankcase with the rotary valve damaged. It is sold in 3 different models and can be configured using carburetors from the original 19-19 up to 30-30PHBH, to further increase performance it is possible to use the Pinasco 8X reed valve Art.26381351, the intake manifolds DO NOT require modifications to the frame.
Pinasco 102cc SRV "Zuerino" cylinder kit Ø 55mm, stroke 43mm. Born on the basis of the famous 135cc Zuera, it uses specific manifold for Ø22-24-25 carburetors.
